|
Produktdetails:
|
|
| Modellnummer: | FM20/FM30 |
|---|---|
|
Zahlung und Versand AGB:
|
|
| Preis: | Verhandelbar |
| Verpackung Informationen: | Normales Paket |
| Lieferzeit: | 1-2 Tage |
| Zahlungsbedingungen: | T/T, Western Union, PayPal |
| Versorgungsmaterial-Fähigkeit: | 30 |
|
Detailinformationen |
|||
| Menge: | 50 Stk | Funktion: | Gesundheitszustand des Monitor-Patienten |
|---|---|---|---|
| Auf Lager: | Ja | Betrachtungswinkel: | ca. 60° |
| Kompatible Marke: | PH | Garantie: | 90 Tage |
| Kundenschulung: | Optionale Schulung nach der Reparatur | Versandbedingungen: | DHL, EMS, UPS, ACS usw. |
| Status: | In gutem Zustand | Versandart: | DHL, UPS, Fedex |
| Serviceverfügbarkeit: | Weltweit | Aktie: | Exvorrat |
| Ersatzteile: | Originalteile | ||
Produkt-Beschreibung
| Part Number | M2705-66410 (also listed under 451261009061) |
|---|---|
| Function | Controls all primary monitor operations, including signal processing from the fetal probes (ultrasound, TOCO), maternal vital signs modules, and the overall user interface. This is the core logic board. |
| Application | If the monitor fails to boot, has corrupted graphics, or is unresponsive, this is the primary suspect. |
| Part Number | Part of the M4605A / M8023A series (External) |
|---|---|
| Function | This is a wide-range switching power supply. It automatically accepts input from 100V to 240V (±10%) at 50/60 Hz and converts it to the necessary DC voltages (primarily 24V output) to run the main board, display, and thermal recorder. |
| Application | Used for "No Power" or "Intermittent Shutdown" issues. |
| Part Number | M2703-26420 / M2703-66420 |
|---|---|
| Function | This board acts as the physical interface gateway. It is the board where the fetal sensors (TOCO, Ultrasound) and patient cables plug into the front of the monitor. |
| Application | If specific sensors are not being detected (e.g., "Probe Disconnected" error) but the rest of the monitor works, this board may be faulty. |
| Part Number | M2703-26440 |
|---|---|
| Function | This is the closest equivalent to a "Touch Drive Board." It controls the touchscreen overlay. It translates your touch inputs into digital signals for the Main Board. |
| Application | If the display works (shows waveforms/numbers) but the screen does not respond to touch, this specific driver board is likely the issue. |
Tragen Sie Ihre Mitteilung ein